Whatsapp ID: +8618569983373
WeChat ID: +8618569983373

Winch Motor Maintenance

The motor is an important part of the winch, and it is also the most expensive part of the winch. If it is damaged, the cost of maintenance or replacement will be very high. It is important and necessary to take good care of the winch or winch motor.

1.The operating environment shall be kept dry frequently, the surface of the motor shall be kept clean, and the air inlet shall not be obstructed by dust, fiber, etc

2.When the thermal protection of the motor continuously acts, it should be found out whether the fault is caused by the motor or overload or the setting value of the protection device is too low. After the fault is eliminated, it can be put into operation.

3.The motor shall be well lubricated during operation.

4.When disassembling the motor, take out the rotor from the shaft extension end or the non extension end.

5.When replacing the winding, the form, size, turns, wire gauge, etc. of the original winding must be noted down. When these data are lost, it is necessary to ask the manufacturer for them, and change the original design winding at will, which often makes one or several performances of the motor deteriorate, or even cannot be used.

    Get In Touch

    Our teams are on hand to provide you with the right lifting solutions.


    1.The product you need:

    2.Product specifications:

    3.What will the product be used for: ?

    4.When will you plan to use the product: ?

    5.Project introduction: project working site, project budget, etc.